5-8500-CE
COMMERCIAL AND ARCHITECTURAL DOORS
Particleboard Core Door (PC)
Download the technical sheet (PDF)
Technical sheet
Last update : 1 November 2024
Edge finishing
Compatible edge
Type
Particleboard core (PC) (interior use).
In conformity with industry standards
ANSI A208.1-2016
WDMA Series I.S. 1-A-2021
NAAWS 4.0
ASTM D5456-09
ARCHITECTURAL WOODWORK STANDARDS - ED.2
Fire Rating Details
20 minutes neutral pressure.
UL 10B Neutral pressure
NFPA 252
CAN/ULC-S104
Refer to fire-rated options of our Architectural Catalog (e-version)
Thickness
1-3/4″ (44 mm) to 2-1/4″ (57 mm).
Maximum size
Neutral pressure: 1219 mm x 2743 mm (48 in x 108 in).
Non-rated: 48 in x 120 in (1219 mm x 3048 mm).
Stiles
CE (Compatible Edge): 15/16" (24 mm) wood (mill option). Laminated to a piece of 3-3/8'' (86 mm) thick. This piece is made of laminated wood veneer strips of 1/8'' (3 mm) each. These strips are longitudinally laminated by hot pressing (LVL). PE (Plastic Edge): HPDL edges. FE: Lambton Doors' EDGEFENDER: High impact resistant edges.
Rails
Piece of 3-3/8 in (86 mm) thick. This piece is made of laminated wood veneer strips of 1/8 in (3 mm) each. These strips are longitudinally laminated by hot pressing (LVL).
Core
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1 bonded to the stiles and rails.
Adhesive
Type I (Waterproof); PVA (UF-Free).
Face
Wood veneer, MDO or HPDL laminated to a HDF.
Options
LD-2 core, FSC and ULEF.
Lambton Doors' EDGEFENDER: High impact resistant edges.
PE (Plastic Edge); HPDL edges.
LD-2 core.
Lite and louver opening
Cut-out must not exceed 40% of door area (LD-1). All models: minimum 5 in (127 mm) from stiles or rails. Non-rated: minimum 1-1/2 in (38 mm) from cut-out to cut-out. 20 minute: minimum 2-3/4 in (70 mm) from cut-out to cut-out.
Wood louvers not permitted with 20 minute labeled doors.
Notes
Thickness 44 mm (1-3/4") : LD-1 = 5.2 lb/ft2. LD-2 = 5.6 lb/ft2.
Stile and rail dimensions shown are rough sizes, before trimming.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System 9 by AWI. Stain, clearcoat, opaque and primed finish available. Custom color matching available. No VOC. Sealed top and bottom standard. Lambton Doors' ASEPTI: Antimicrobial coated surface in option.
http://www.lambtondoors.com/