Last update : 15 April 2012
Edge finishing
Matching edge
Type
Laminated Strand Lumber core (interior use).
In conformity with industry standards
W.D.M.A. SERIES I.S.1-A-2004
C.S.A. D132.2 Serie 90
ASTM D5456-09
ARCHITECTURAL WOODWORK STANDARDS - ED.1
Thickness
1-3/4" (44 mm).
Maximum size
48" x 96" (1 219 mm x 2 438 mm).
Stiles
7/16" (11 mm) hardwood.
Core
Structural composite lumber (SCL) with a density of 38 PCF (609 kg/m³) bonded to the stiles.
Adhesive
Type I, fully waterproof;
PVA (no urea formaldehyde);
VOC < 0,683 g/L.
Face
Wood veneer or MDO bonded to a composite crossband. Hardboard on 7 ply doors.
Options
[5 or 7-LSL-LL20] 20 minute rating. Neutral pressure, single swing only. Lead thickness available : 1/6" (1,59 mm) total or 1/8" (3,175 mm) total.
Lite opening
Limited to 1,296 in² (0,836 m²). Non-rated: wood beads or metal kit model #115-L2. Rated: metal kit model #115-L1.
Notes
Lambton Doors recommends the use of heavy duty hinges.
Available only with 2 sheets of lead : 2 x 1/32" (0,79 mm) = 1/16" (1,59 mm) total, or 2 x 1/16" (1,59 mm) = 1/8" (3,175 mm) total.
Stile dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
http://www.lambtondoors.com/