Technical sheet

Last update : 25 October 2024

Edge finishing
Matching edge
Type
Mineral core (interior use).
In conformity with industry standards
WDMA Series I.S. 1-A-2021
NAAWS 4.0
ARCHITECTURAL WOODWORK STANDARDS - ED.2
Fire Rating Details
90 minutes neutral or positive pressure.
UL 10C Positive pressure Category A in option
UL 10C Positive pressure Category B
UL 10B Neutral pressure
NFPA 252
CAN/ULC-S104
Refer to fire-rated options of our Architectural Catalog (e-version)
45 Minute neutral or positive pressure
Thickness
1-3/4″ (44 mm) to 2-1/4″ (57 mm).
Maximum size
Neutral and Positive Pressure: 48 in x 108 in (1219 mm x 2743 mm )
Stiles
7/16" (11 mm) hardwood laminated to 1" (25 mm) proprietary material (FPCM)*. PE (Plastic Edge): HPDL edges. FE: Lambton Doors' EDGEFENDER: High impact resistant edges.
Top rail
1-1/2'' (38 mm) of proprietary materials (FPCM)*.
Bottom rail
1-1/2'' (38 mm) of proprietary materials (FPCM)*.
Core
Non-combustible mineral core bonded to the stiles and rails.
Adhesive
Type I (Waterproof); PVA (UF-Free).
Face
Wood veneer, MDO or HPDL laminated to a HDF.
Options
Blocking for hardware.
Notes
Stile and rail dimensions shown are rough sizes, before trimming.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System 9 by AWI. Stain, clearcoat, opaque and primed finish available. Custom color matching available. No VOC. Sealed top and bottom standard. Lambton Doors' ASEPTI: Antimicrobial coated surface in option.
Door weight
Thickness 1-3/4 in (44 mm) = 5,8 lb/ft2.
Environmental benefits
Low Emitting Materials, NAF/ULEF. Specify NAF.
* (FPCM) Fire proof compisite material
http://www.lambtondoors.com/