5-FS8300-EBE
COMMERCIAL AND ARCHITECTURAL DOORS
Particleboard Core Door (PC)
FSC Certified
No urea formaldehyde
Download the technical sheet (PDF)
Technical sheet
Last update : 1 November 2024
Edge finishing
Blind edge
Type
Particleboard core (PC) (interior use).
In conformity with industry standards
ANSI A208.1-2016
WDMA Series I.S. 1-A-2021
NAAWS 4.0
ASTM D5456-09
ARCHITECTURAL WOODWORK STANDARDS - ED.2
Fire Rating Details
20 minute neutral or positive pressure.
UL 10C Positive pressure Category A in option
UL 10C Positive pressure Category B
UL 10B Neutral pressure
NFPA 252
CAN/ULC-S104
Refer to fire-rated options of our Architectural Catalog (e-version)
Thickness
20 minute: 1-3/4 in (44 mm) to 2-1/4 in (57 mm).
Non-rated: 1-3/8 in (35 mm).
Maximum size
Neutral and Positive Pressure: 48 in x 108 in (1219 mm x 2743 mm )
Non-rated: 48 in x 120 in (1219 mm x 3048 mm).
Stiles
BE (Blind Edge): 7/16" (11 mm) hardwood. Laminated to 4" (102 mm) Structural Composite Lumber (SCL) PE : (Plastic Edge), HPDL edges. FE : Lambton Doors’ EDGEFENDER, high impact resistant edges.
Rails
3" (76 mm) Structural Composite Lumber (SCL).
Core
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1 bonded to the stiles and rails.
Adhesive
Type I (Waterproof); PVA (UF-Free).
Face
Wood veneer, MDO or HPDL laminated to a HDF.
Options
LD-2 core, FSC and ULEF.
15/16" (24 mm) wood (mill option) or hardwood laminated to 4" (102 mm) Structural Composite Lumber (SCL).
Lite and louver opening
Cut-out must not exceed 40% of door area (LD-1). All models: minimum 5 in (127 mm) from stiles or rails. Non-rated: minimum 1-1/2 in (38 mm) from cut-out to cut-out. 20 minute: minimum 2-3/4 in (70 mm) from cut-out to cut-out.
Wood louvers not permitted with 20 minute labeled doors.
Notes
Door weights Thickness 1-3/4 in (44 mm) : LD-1 = 5,4 lbs/ft2, LD-2= 5,7 lbs/ft2
Stile and rail dimensions shown are rough sizes, before trimming.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System 9 by AWI. Stain, clearcoat, opaque and primed finish available. Custom color matching available. No VOC. Sealed top and bottom standard. Lambton Doors' ASEPTI: Antimicrobial coated surface in option.
Environmental benefits
FSC Certified wood. Specify 5-FS8300.
EPD : Environmental Product Declaration available. HPD : Health Product Declaration available.
Low emitting materials, NAF-ULEF. Specify 5-UF8300.
Regional Materials. According to jobsite location.
Recycled content. All series.