5-FS8500-EME
COMMERCIAL AND ARCHITECTURAL DOORS
Particleboard Core Door (PC)
FSC Certified
No urea formaldehyde
Download the technical sheet (PDF)
Technical sheet
Last update : 18 December 2015

Edge finishing
Matching edge
Type
FSC certified Particleboard core (PC) (interior use).
In conformity with industry standards
W.D.M.A. SERIES I.S.1-A-2013
ASTM D5456-09
ARCHITECTURAL WOODWORK STANDARDS - ED.2
ANSI A208.1
Fire Rating Details
20 minute neutral or positive pressure.
UL 10C Positive pressure Category A in option
UL 10C Positive pressure Category B
UL 10B Neutral pressure
NFPA 252
CAN/ULC-S104
Refer to fire-rated options of our Architectural Catalog (e-version)
Thickness
20 minute: 1-3/4 in (44 mm) to 2-1/4 in (57 mm).
Non-rated: 1-3/8 in (35 mm).
Maximum size
Positive pressure: 48 in x 108 in (1219 mm x 2743 mm).
Neutral pressure: 48 in x 120 in (1219 mm x 3048 mm).
Non-rated: 48 in x 120 in (1219 mm x 3048 mm).
Stiles
EME (Matching Edge): 15/16 in (24 mm) hardwood. Laminated to a piece of 3-3/8 in (86 mm) thick. This piece is made of laminated wood veneer strips of 1/8 in (3 mm) each. These strips are longitudinally laminated by hot pressing (LVL).
Rails
Piece of 3-3/8 in (86 mm) thick. This piece is made of laminated wood veneer strips of 1/8 in (3 mm) each. These strips are longitudinally laminated by hot pressing (LVL).
Core
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1 bonded to the stiles and rails.
Adhesive
Type I (Waterproof);
PVA (UF-Free);
VOC< 0,683 g/L.
Face
Wood veneer, MDO or HPDL laminated to a HDF.
Options
LD-2 core, FSC and UF-Free.
EPE (Plastic Edge): HPDL edges.
Lambton Doors' EDGEFENDER: High impact resistant edges.
UF-Free Faces.
Lite and louver opening
Cut-out must not exceed 40% of door area (LD-1). All models: minimum 5 in (127 mm) from stiles or rails. Non-rated: minimum 1-1/2 in (38 mm) from cut-out to cut-out. 20 minute: minimum 2-3/4 in (70 mm) from cut-out to cut-out.
Wood louvers not permitted with 20 minute labeled doors.
Notes
Stile and rail dimensions shown are rough sizes, before trimming.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System 9 by AWI. Stain, clearcoat, opaque and primed finish available. Custom color matching available. No VOC. Sealed top and bottom standard. Lambton Doors' ASEPTI: Antimicrobial coated surface in option.
Environmental benefits
IEQ4.4: Low Emitting Materials. UF-Free. Specify 5-UF8500.
MRc7: FSC certified wood. Specify 5-FS8500.
MRc5: Regional Materials. According to jobsite location.
MRc4.1, 4.2: Recycled Content. All Series.
