COMMERCIAL AND ARCHITECTURAL DOORS
No urea formaldehyde
Last update : 5 May 2022
FSC certified Particleboard core (PC) (interior use).
In conformity with industry standards
WDMA Series I.S. 1-A-2021
ARCHITECTURAL WOODWORK STANDARDS - ED.2
Fire Rating Details
20 minute neutral or positive pressure.
UL 10C Positive pressure Category A in option
UL 10C Positive pressure Category B
UL 10B Neutral pressure
Refer to fire-rated options of our Architectural Catalog (e-version)
20 minute: 1-3/4 in (44 mm) to 2-1/4 in (57 mm).
Non-rated: 1-3/8 in (35 mm).
Neutral and Positive Pressure: 48 in x 108 in (1219 mm x 2743 mm )
Non-rated: 48 in x 120 in (1219 mm x 3048 mm).
EBE (Blind Edge): 7/16 in (11 mm) hardwood. Laminated to 4 in (102 mm) Structural Composite Lumber (SCL). PE : (Plastic Edge), HPDL edges. FE : Lambton Doorsâ€™ EDGEFENDER, high impact resistant edges.
3 in (76 mm) Structural Composite Lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1 bonded to the stiles and rails.
Type I (Waterproof); PVA (UF-Free).
Wood veneer, MDO or HPDL laminated to a HDF.
15/16" (24 mm) wood (mill option) or hardwood laminated to 4" (102 mm) Structural Composite Lumber (SCL).
Lite and louver opening
Cut-out must not exceed 40% of door area (LD-1). All models: minimum 5 in (127 mm) from stiles or rails. Non-rated: minimum 1-1/2 in (38 mm) from cut-out to cut-out. 20 minute: minimum 2-3/4 in (70 mm) from cut-out to cut-out.
Wood louvers not permitted with 20 minute labeled doors.
Door weights Thickness 1-3/4 in (44 mm) : LD-1 = 5,4 lbs/ft2, LD-2= 5,7 lbs/ft2
Stile and rail dimensions shown are rough sizes, before trimming.
Life of original installation. See our complete warranty for details.
UV Finishing System 9 by AWI. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Sealed top and bottom standard. Lambton Doorsâ€™ ASEPTI: Antimicrobial coated surface in option.
FSC Certified wood. Specify 5-FS8300.
EPD : Environmental Product Declaration available. HPD : Health Product Declaration available.
Low emitting materials, NAF-ULEF. Specify 5-UF8300.
Regional Materials. According to jobsite location.
Recycled content. All series.