Technical sheet
Last update : 15 April 2012
Edge finishing
Compatible edge
Type
Particleboard core (PC) (interior use).
In conformity with industry standards
W.D.M.A. SERIES I.S.1-A-2004
ASTM D5456-09
ARCHITECTURAL WOODWORK STANDARDS - ED.1
ANSI A208.1
Thickness
1-3/4" (44 mm).
Maximum size
48" x 120" (1 219 mm x 3 048 mm).
Stiles
7/16'' (11mm) wood (mill option) laminated to 4'' (102 mm) structural composite lumber (SCL).
Rails
3'' (76 mm) structural composite lumber (SCL).
Core
Particleboard core with a density of 28-32 PCF (449-513 kg/m³) LD-1, bonded to the stiles and rails.
Adhesive
Type I, fully waterproof;
PVA (no urea formaldehyde);
VOC < 0,683 g/L.
Face
Hardboard.
Options
LD-2 core.
Refer to Architect Space of our Website for details.
20 minute rating neutral or positive pressure.
15/16" (24 mm) wood (mill option) laminated to 4" (102 mm) Structural Composite Lumber (SCL).
Lite and louver opening
Wood louvers not permitted in 20 minute labeled doors. Minimum 5" (127 mm) from stiles or rails. Minimum 1-1/2" (38 mm) from cut-out to cut-out. Refer to Architect Space of our Website for details.
Notes
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Warranty
Life of original installation. See our complete warranty for details.
Factory finish
UV Finishing System. White primer available. Seal top and bottom standard. No VOC.
Environmental benefits
Recycled content (LEED® MRc4.1, MRc4.2).
