COMMERCIAL AND ARCHITECTURAL DOORS
Download the technical sheet (PDF)
Last update : 15 April 2012
Particleboard core (PC) (interior use).
In conformity with industry standards
W.D.M.A. SERIES I.S.1-A-2004
ARCHITECTURAL WOODWORK STANDARDS - ED.1
1-3/8" (35 mm).
1-3/4" (44 mm).
2" (51 mm).
2-1/4" (57 mm).
48" x 120" (1 219 mm x 3 048 mm).
7/16'' (11mm) wood (mill option) laminated to 1'' (25 mm) structural composite lumber (SCL).
1-7/16 (36 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/mÂ³) LD-1, bonded to the stiles and rails.
Type I, fully waterproof; PVA (no urea formaldehyde); VOC < 0,683 g/L.
[Door 1-3/4" (44 mm)] 20 minute rating neutral or positive pressure.
15/16 in (24 mm) wood (mill option) or hardwood laminated to 1 in (25 mm) Structural Composite Lumber (SCL).
Refer to Architect Space of our Website for details.
Available in bifold.
Lite and louver opening
Cut-out must not exceed 40% of door area.
Wood louvers not permitted in 20 minute labeled doors. Minimum 5" (127 mm) from stiles or rails. Minimum 1-1/2" (38 mm) from cut-out to cut-out. Refer to Architect Space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. White primer available. Seal top and bottom standard. No VOC.
Recycled content (LEED® MRc4.1, MRc4.2).